iRayUSA ADM Flip-to-Side Mount for RICO Micro (AC55)
Mount for one thermal or NV line · QD · 2.05 in height · $349
QD mount
A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot.
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Optics it fits
iRayUSA says: "Compatible with RH25V2, RL25V2, and first generation RH25 models. Requires AC52 'Pictail' mount."
Maker says it fits
| Optic | Who says so | Tube center above the rail (calculated) |
|---|---|---|
| InfiRay Rico Micro 640 25mm (RH25)Thermal monoculars | "Compatible with RH25V2, RL25V2, and first generation RH25 models" | InfiRay does not publish the height of the unit’s optical axis above its mounting base |
| InfiRay Rico Micro V2 384 25mm (RL25 V2)Thermal scopes | "Compatible with RH25V2, RL25V2, and first generation RH25 models" | InfiRay does not publish the height of the unit’s optical axis above its mounting base |
| InfiRay Rico Micro V2 640 25mm (RH25 V2)Thermal scopes | "Compatible with RH25V2, RL25V2, and first generation RH25 models" | InfiRay does not publish the height of the unit’s optical axis above its mounting base |
Tube center above the rail is calculated only when the mount maker says where its height is measured from and the optic maker states a tube diameter; each blank says which figure is missing.
Specs
| Type | |
|---|---|
| Type QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Mount for one thermal or NV line |
| Built by | American Defense Manufacturing (ADM) |
| Mounts to | |
| Clamps onto Picatinny and Weaver rails The slotted rails most mounts clamp onto. Picatinny (MIL-STD-1913) has evenly spaced slots of one width; Weaver slots are narrower and spaced irregularly. Weaver mounts fit Picatinny; the reverse not always. | Not statedRail type not stated; QD lever placement is configurable |
| Quick-detach QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Yes"multiple configurations depending on the desired side of the hinge and QD lever placement"; "Reversible design can be used to hinge to the left or to the right" |
| Holds | |
| Holds | iRayUSA PICTAIL shoe (AC52)"Requires AC52 'Pictail' mount"; flips the MICRO in or out in front of a day optic |
| Geometry | |
| Height, as published Scope height over bore How far the scope's center sits above the barrel's center. It decides your cheek weld and the bullet's path at close range. We calculate only the part above the rail, where makers publish it. | 2.1 in (52.1 mm)2.05 in. co-witness height |
| Where the height is measured | Centerline height; the maker does not say where it is measured from |
| Cantilever Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Not stated |
| Forward offset Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Not published |
| Weight and build | |
| Weight Weight How heavy the device is. Check whether the maker weighed it with or without the battery, because brands do it differently. | Not published |
| Material | machined aluminum, anodized |
| Buying | |
| Made in | USA |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | IRAY-AC55 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $349iRayUSA store (irayusa.com); page lists MAP 349 |
"2.05 in. co-witness height is designed for compatibility with night-vision height optics"; iRayUSA gives no reference point, so the datum is center-unstated.
Source: iRayUSA store, ADM Flip-to-Side Mount for RICO Micro.
Added October 12, 2026 · Specs last checked October 12, 2026