OneLeaf LQD Quick Detach Cantilever Mount for MT1000LRF
Mount for one thermal or NV line · QD · 3.1 oz · $95
QD mount
A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot.
Maker's full product title: "Quick Detach Cantilever Mount for Mars MT1000LRF (New Version with recoil lug)".
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Optics it fits
OneLeaf says: Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle".
Maker says it fits
| Optic | Who says so | Tube center above the rail (calculated) |
|---|---|---|
| OneLeaf Commander NV500 2-16x30Night vision scopes | Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle" (Commander NV500) | OneLeaf does not publish the height of the unit’s optical axis above its mounting base |
| OneLeaf Commander NV500 4-32x50Night vision scopes | Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle" (Commander NV500) | OneLeaf does not publish the height of the unit’s optical axis above its mounting base |
| OneLeaf Commander NV500 6-48x70Night vision scopes | Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle" (Commander NV500) | OneLeaf does not publish the height of the unit’s optical axis above its mounting base |
| OneLeaf Commander NV500 Eagle 1.5-12x30Night vision scopes | Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle" (NV500 Eagle) | OneLeaf does not publish the height of the unit’s optical axis above its mounting base |
| OneLeaf Commander NV500 Eagle 2-16x50Night vision scopes | Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle" (NV500 Eagle) | OneLeaf does not publish the height of the unit’s optical axis above its mounting base |
| OneLeaf Commander NV500 Eagle 4.5-36x70Night vision scopes | Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle" (NV500 Eagle) | OneLeaf does not publish the height of the unit’s optical axis above its mounting base |
| OneLeaf Mars MT1000LRF 35mmThermal scopes | Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle" (Mars MT1000LRF) | OneLeaf does not publish the height of the unit’s optical axis above its mounting base |
| OneLeaf Mars MT1000LRF 50mmThermal scopes | Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle" (Mars MT1000LRF) | OneLeaf does not publish the height of the unit’s optical axis above its mounting base |
| OneLeaf Mars MT1000LRF 75mmThermal scopes | Compatibility: "Mars MT1000LRF, Commander NV500, NV500 Eagle" (Mars MT1000LRF) | OneLeaf does not publish the height of the unit’s optical axis above its mounting base |
Tube center above the rail is calculated only when the mount maker says where its height is measured from and the optic maker states a tube diameter; each blank says which figure is missing.
Specs
| Type | |
|---|---|
| Type QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Mount for one thermal or NV line |
| Mounts to | |
| Clamps onto Picatinny and Weaver rails The slotted rails most mounts clamp onto. Picatinny (MIL-STD-1913) has evenly spaced slots of one width; Weaver slots are narrower and spaced irregularly. Weaver mounts fit Picatinny; the reverse not always. | PicatinnyMount type "Picatinny"; Picatinny rails 20 mm / 0.79 inch; "Recoil lug added" |
| Quick-detach QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Yes"Tool-free attachment and detachment"; "Advanced locking features" |
| Holds | |
| Holds | Maker's own interface"Tailored for Mars MT1000LRF Thermal Scope"; six screws included |
| Geometry | |
| Height, as published Scope height over bore How far the scope's center sits above the barrel's center. It decides your cheek weld and the bullet's path at close range. We calculate only the part above the rail, where makers publish it. | Not published |
| Cantilever Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Yes |
| Forward offset Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Not published |
| Weight and build | |
| Weight Weight How heavy the device is. Check whether the maker weighed it with or without the battery, because brands do it differently. | 0.2 lb (0.09 kg)89 g / 3.14 oz |
| Material | Aluminum, black |
| Buying | |
| Made in | Not published |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | LQD |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $95OneLeaf store (oneleaf.ai); $93 as an add-on with the MT1000LRF |
Dimensions "147 x 31 mm", axes not labeled. OneLeaf prints no height or offset. Bought alone it ships by standard post ("at least 15 days").
Source: OneLeaf store, LQD mount page.
Added October 12, 2026 · Specs last checked October 12, 2026