RIX Optics QDM-LP01 Quick Detach Picatinny Mount, 1.55 in
Mount for one thermal or NV line · QD · 1.55 in height · 5.2 oz · $149
QD mount
A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot.
Maker's full product title: "QDM-LP01 Quick Detach Picatinny Mount 1.55″ Height".
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Optics it fits
RIX Optics says: "Compatible with: LPR L6R, LEAP L3, LEAP L6, LEAP L3R, LEAP L6R, TOURER T50 4K"; "Not compatible with: LEAP L12R"; "not compatible with other LPR products not listed above" (so the LPR L12R and L6R SE are not linked).
Maker says it fits
| Optic | Who says so | Tube center above the rail (calculated) |
|---|---|---|
| RIX Optics Leap L3Thermal scopes | "Compatible with: LPR L6R, LEAP L3, LEAP L6, LEAP L3R, LEAP L6R, TOURER T50 4K" | RIX Optics does not publish the height of the unit’s optical axis above its mounting base |
| RIX Optics Leap L3RThermal scopes | "Compatible with: LPR L6R, LEAP L3, LEAP L6, LEAP L3R, LEAP L6R, TOURER T50 4K" | RIX Optics does not publish the height of the unit’s optical axis above its mounting base |
| RIX Optics Leap L6Thermal scopes | "Compatible with: LPR L6R, LEAP L3, LEAP L6, LEAP L3R, LEAP L6R, TOURER T50 4K" | RIX Optics does not publish the height of the unit’s optical axis above its mounting base |
| RIX Optics Leap L6RThermal scopes | "Compatible with: LPR L6R, LEAP L3, LEAP L6, LEAP L3R, LEAP L6R, TOURER T50 4K" | RIX Optics does not publish the height of the unit’s optical axis above its mounting base |
| RIX Optics LPR L6RThermal scopes | "Compatible with: LPR L6R, LEAP L3, LEAP L6, LEAP L3R, LEAP L6R, TOURER T50 4K" | RIX Optics does not publish the height of the unit’s optical axis above its mounting base |
| RIX Optics Tourer T50 4K digitalNight vision scopes | "Compatible with: LPR L6R, LEAP L3, LEAP L6, LEAP L3R, LEAP L6R, TOURER T50 4K" | RIX Optics does not publish the height of the unit’s optical axis above its mounting base |
Tube center above the rail is calculated only when the mount maker says where its height is measured from and the optic maker states a tube diameter; each blank says which figure is missing.
Specs
| Type | |
|---|---|
| Type QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Mount for one thermal or NV line |
| Mounts to | |
| Clamps onto Picatinny and Weaver rails The slotted rails most mounts clamp onto. Picatinny (MIL-STD-1913) has evenly spaced slots of one width; Weaver slots are narrower and spaced irregularly. Weaver mounts fit Picatinny; the reverse not always. | PicatinnyRail compatibility: "Picatinny Rail" |
| Quick-detach QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Yes"dual precision QD levers featuring integrated safety lock buttons" |
| Holds | |
| Holds | RingsHolds the scope tube; screw specification "M4×10" |
| Ring size Ring size The inside diameter of scope rings: 1 in (25.4 mm), 30, 34 or 35 mm. It must equal the scope's tube diameter. Many thermal scopes have a 30 mm tube; others take only their maker's mount. | — |
| Geometry | |
| Height, as published Scope height over bore How far the scope's center sits above the barrel's center. It decides your cheek weld and the bullet's path at close range. We calculate only the part above the rail, where makers publish it. | 1.5 in (39.3 mm)Mount Height: 39.3 mm / 1.55 in |
| Where the height is measured | Centerline height; the maker does not say where it is measured from |
| Cantilever Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Not stated |
| Forward offset Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Not publishedNo offset figure |
| Weight and build | |
| Weight Weight How heavy the device is. Check whether the maker weighed it with or without the battery, because brands do it differently. | 0.3 lb (0.15 kg)146 g / 5.15 oz |
| Material | Aluminum ("aircraft-grade aluminum") |
| Buying | |
| Made in | Not published |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | QDM-LP01 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $149RIX store (rixoptics.com); shown out of stock ("Notify Me When Back") |
Dimensions 165 × 51 × 64 mm / 6.50 × 2.01 × 2.52 in, axes not labeled. "30% lighter than the previous generation". The page calls the figure "Mount Height" and "the ideal centerline height" without saying where it is measured from. Recoil rating 1000 G / 6000 J. RIX's mount page prints no ring diameter; the RIX manuals for the LEAP L3R/L6R and L12R give "Compatible mounts: 30mm rings", and the LPR manual gives a 30 mm tube for the L6R. ringMm is left empty.
Source: RIX store, QDM-LP01 page, RIX LEAP L6R/L3R user manual (PDF, spec table: compatible mounts).
Added October 12, 2026 · Specs last checked October 12, 2026
More from RIX Optics
RIX Optics · Device mount · QD
QDM-S01 Quick Detach Picatinny Mount for STORM
RIX Optics · Device mount · QD
QDM-L01 Quick Detach Picatinny Mount, 1.5 in
RIX Optics · Device mount · QD
QDM-L02 Quick Detach Picatinny Mount, 1.59 in