Kill Light Windage and Elevation Mount
Light-to-scope mount · 1 in light · 4.6 oz · $50
Light-to-scope mount
A clamp that holds a hunting light on the scope tube or a rail, often with windage and elevation knobs to aim the beam at the crosshair. Each light maker sizes it to its own light.
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Lights it holds
| Light | Basis |
|---|---|
| Kill Light HD4 | Maker says it fitsCompatible lights list names HD4 |
| Kill Light HD4X | Maker says it fitsCompatible lights list names HD4X |
| Kill Light Piglet Gun Kit | Maker says it fitsCompatible lights list names Piglet (the gun kit's light) |
| Kill Light XLR 250 | Maker says it fitsCompatible lights list names XLR 250 |
| Kill Light XLR 250X | Maker says it fitsCompatible lights list names XLR 250X |
| Kill Light XLR 750HD | Maker says it fitsCompatible lights list names HD Series Lights (250HD, 500HD, 750HD) |
| Acebeam L19 2.0 Predator Hunting Kit | Interfaces match (calculated)1 in ring; Acebeam publishes a 1 in body |
| Fenix HT18R V2.0 | Interfaces match (calculated)1 in ring; Fenix publishes a 1 in body |
| Fenix HT32 | Interfaces match (calculated)1 in ring; Fenix publishes a 1 in body |
| Kill Light Piglet HD Pro Package | Interfaces match (calculated)1 in ring; Kill Light publishes a 1 in body |
| Kill Light Piglet Mini Package | Interfaces match (calculated)1 in ring; Kill Light publishes a 1 in body |
| Sniper Hog Lights 30LRX | Interfaces match (calculated)1 in ring; Sniper Hog Lights publishes a 1 in body |
Specs
| Type | |
|---|---|
| Type Light-to-scope mount A clamp that holds a hunting light on the scope tube or a rail, often with windage and elevation knobs to aim the beam at the crosshair. Each light maker sizes it to its own light. | Light-to-scope mount |
| Mounts to | |
| Clamps onto Picatinny and Weaver rails The slotted rails most mounts clamp onto. Picatinny (MIL-STD-1913) has evenly spaced slots of one width; Weaver slots are narrower and spaced irregularly. Weaver mounts fit Picatinny; the reverse not always. | Weaver"Designed for standard Weaver-style rails" |
| Quick-detach QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Not statedFlip-top ring installs or removes the light without small screws or tools; the rail clamp is not described |
| Holds | |
| Holds | 1 in lightFlip-top ring; "Tube Diameter: 1 inch/25mm" |
| Ring size Ring size The inside diameter of scope rings: 1 in (25.4 mm), 30, 34 or 35 mm. It must equal the scope's tube diameter. Many thermal scopes have a 30 mm tube; others take only their maker's mount. | 1 in (25.4 mm) |
| Windage and elevation adjustment | Yes |
| Geometry | |
| Height, as published Scope height over bore How far the scope's center sits above the barrel's center. It decides your cheek weld and the bullet's path at close range. We calculate only the part above the rail, where makers publish it. | 2.8 in (69.9 mm)Mount Height: 2.75 inches |
| Where the height is measured | Measured from a point the maker names (see note) |
| Length | 2.3 in (57.2 mm) |
| Weight and build | |
| Weight Weight How heavy the device is. Check whether the maker weighed it with or without the battery, because brands do it differently. | 0.3 lb (0.13 kg)Mount Weight: 4.6 ounces |
| Material | Aircraft-grade aluminum |
| Buying | |
| Made in | Not published |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | 3809 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $50Elusive Wildlife store |
Mount Height is the overall height of the mount, not a center height. Dimensions block: height 2.75 in, length 2.25 in, width 2 in. Sold by Elusive Wildlife (Kill Light's maker); the SKU is the store's item number.
Source: Elusive Wildlife, Windage and Elevation Mount page.
Added October 12, 2026 · Specs last checked October 12, 2026