Nocpix SLIM Rifle Side Dual-QD Shoe Mount (SLIM-MOUNT-2)
Mount for one thermal or NV line · QD · $179
QD mount
A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot.
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Optics it fits
Nocpix says: Compatible Products: "SLIM H35, L35, L25"; ships in the case with each SLIM.
Maker says it fits
| Optic | Who says so | Tube center above the rail (calculated) |
|---|---|---|
| Nocpix SLIM H35Thermal scopes | "Your SLIM series thermal optic ships with a mounting foot (MOUNT-1) pre-installed on the optic and MOUNT-2 in the case" | Nocpix does not publish the height of the unit’s optical axis above its mounting base |
| Nocpix SLIM L25Thermal scopes | "Your SLIM series thermal optic ships with a mounting foot (MOUNT-1) pre-installed on the optic and MOUNT-2 in the case" | Nocpix does not publish the height of the unit’s optical axis above its mounting base |
| Nocpix SLIM L35Thermal scopes | "Your SLIM series thermal optic ships with a mounting foot (MOUNT-1) pre-installed on the optic and MOUNT-2 in the case" | Nocpix does not publish the height of the unit’s optical axis above its mounting base |
Tube center above the rail is calculated only when the mount maker says where its height is measured from and the optic maker states a tube diameter; each blank says which figure is missing.
Specs
| Type | |
|---|---|
| Type QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Mount for one thermal or NV line |
| Mounts to | |
| Clamps onto Picatinny and Weaver rails The slotted rails most mounts clamp onto. Picatinny (MIL-STD-1913) has evenly spaced slots of one width; Weaver slots are narrower and spaced irregularly. Weaver mounts fit Picatinny; the reverse not always. | PicatinnyLever arm locks onto the rifle's Picatinny rail; tension set with a 7/16 in. or 11 mm hex wrench, large flathead or coin |
| Quick-detach QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | YesTwo lever arms (dual-QD): one to the rail, one to the optic's foot; "1-MOA return-to-zero guarantee" |
| Holds | |
| Holds | SLIM mounting foot (SLIM-MOUNT-1)Second lever arm locks the optic's foot (MOUNT-1), rail slot aligned to the recoil lug |
| Geometry | |
| Height, as published Scope height over bore How far the scope's center sits above the barrel's center. It decides your cheek weld and the bullet's path at close range. We calculate only the part above the rail, where makers publish it. | Not published |
| Cantilever Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Not stated |
| Forward offset Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Not published |
| Weight and build | |
| Weight Weight How heavy the device is. Check whether the maker weighed it with or without the battery, because brands do it differently. | Not published |
| Material | Not published |
| Buying | |
| Made in | Not published |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | SLIM-MOUNT-2 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $179Nocpix USA store (nocpixusa.com), variant of the SLIM QD Mount System listing |
SLIM optics ship with the foot (MOUNT-1) pre-installed and a MOUNT-2 in the case; a spare MOUNT-2 lets one SLIM move between two rifles. The 1-MOA figure is a return-to-zero claim, not built-in cant.
Source: Nocpix USA store, SLIM QD Mount System, Nocpix SLIM Series Mounts instruction sheet (PDF).
Added October 12, 2026 · Specs last checked October 12, 2026
More from Nocpix
Nocpix · Scope mount · QD
Quick Release Picatinny Mount (30 mm)
Nocpix · Device mount · QD
Extended Offset Mount for SLIM Series (SLIM-MOUNT-3)
Nocpix · Device mount · QD
RICO 2 Extended Offset QD Mount (RICO2-MOUNT-1)