NightHunting.net

Scope mounts / Nocpix

Nocpix Extended Offset Mount for SLIM Series (SLIM-MOUNT-3)

Mount for one thermal or NV line · QD · $179

QD mount

A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot.

Read more →

Check price

Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.

Optics it fits

Nocpix says: Compatible Products: "SLIM H35, L35, L25".

Maker says it fits

OpticWho says soTube center above the rail (calculated)
Nocpix SLIM H35Thermal scopesCompatible Products: "SLIM H35, L35, L25"Nocpix does not publish the height of the unit’s optical axis above its mounting base
Nocpix SLIM L25Thermal scopesCompatible Products: "SLIM H35, L35, L25"Nocpix does not publish the height of the unit’s optical axis above its mounting base
Nocpix SLIM L35Thermal scopesCompatible Products: "SLIM H35, L35, L25"Nocpix does not publish the height of the unit’s optical axis above its mounting base

Tube center above the rail is calculated only when the mount maker says where its height is measured from and the optic maker states a tube diameter; each blank says which figure is missing.

Specs

Type
Type

QD mount

A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot.

Read more →

Mount for one thermal or NV line
Mounts to
Clamps onto

Picatinny and Weaver rails

The slotted rails most mounts clamp onto. Picatinny (MIL-STD-1913) has evenly spaced slots of one width; Weaver slots are narrower and spaced irregularly. Weaver mounts fit Picatinny; the reverse not always.

Read more →

PicatinnyTwo locking levers with assist buttons; "pre-tensioned to fit most in-spec Picatinny rails"; tension collar with a left-hand-thread locking nut (T15 Torx)
Quick-detach

QD mount

A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot.

Read more →

YesLever clamp with assist buttons
Holds
HoldsSLIM optic body (replaces the factory foot)Replaces the factory foot; "four holes, providing three different mounting positions", fixed with the two original screws
Geometry
Height, as published

Scope height over bore

How far the scope's center sits above the barrel's center. It decides your cheek weld and the bullet's path at close range. We calculate only the part above the rail, where makers publish it.

Read more →

Not published
Cantilever

Cantilever mount

A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail.

Read more →

Not stated
Forward offset

Cantilever mount

A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail.

Read more →

Not published"brings the optic height lower and moves the entire optic back, towards the shooter's eye" compared with the factory mount; no figures
TorqueOptic screws: "Do not exceed 18 in-lbs of torque"
Weight and build
Weight

Weight

How heavy the device is. Check whether the maker weighed it with or without the battery, because brands do it differently.

Read more →

Not published
MaterialNot published
Buying
Made inNot published
Warranty

Warranty

How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner.

Read more →

Not published
Maker part numberSLIM-MOUNT-3
US price

US price

The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot.

Read more →

$179Nocpix USA store (nocpixusa.com)

For "bolt-action rifles, lever action rifles, and systems without an adjustable length of pull"; the factory mount "is optimized for AR platform rifles".

Source: Nocpix USA store, Extended Offset Mount for SLIM Series, Nocpix SLIM Series Mounts instruction sheet (PDF).

Added October 12, 2026 · Specs last checked October 12, 2026

More from Nocpix