Sightmark Wraith Locking Quick Detach Mount

Mount for one thermal or NV line · QD · 4.6 oz · $60

QD mount

A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot.

Maker's full product title: "Locking Quick Detach Mount for Wolfhound Prismatic Sight / Wraith".

Check price

Check eBaynew and used

Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.

Optics it fits

Sightmark says: "tool-less installation and removal of any optic from the Sightmark Wraith series of riflescopes"; "Works with both Sightmark Wraiths and 2nd Generation Wolfhounds". Linked to each Wraith digital riflescope on this site; the Wraith 4K monocular and the Wraith Mini thermal (different mounting) are not linked.

Maker says it fits

Optic	Who says so	Tube center above the rail (calculated)
Sightmark Wraith 4K 4-32x40Night vision scopes	"any optic from the Sightmark Wraith series of riflescopes" (series wording; Wraith 4K 4-32x40)	Sightmark does not publish the height of the unit’s optical axis above its mounting base
Sightmark Wraith 4K Max 3-24x50Night vision scopes	"any optic from the Sightmark Wraith series of riflescopes" (series wording; Wraith 4K Max)	Sightmark does not publish the height of the unit’s optical axis above its mounting base
Sightmark Wraith 4K Mini 2-16x32Night vision scopes	"any optic from the Sightmark Wraith series of riflescopes" (series wording; Wraith 4K Mini 2-16x32)	Sightmark does not publish the height of the unit’s optical axis above its mounting base
Sightmark Wraith 4K Mini 4-32x32Night vision scopes	"any optic from the Sightmark Wraith series of riflescopes" (series wording; Wraith 4K Mini 4-32x32)	Sightmark does not publish the height of the unit’s optical axis above its mounting base
Sightmark Wraith HD 2-16x28Night vision scopes	"any optic from the Sightmark Wraith series of riflescopes" (series wording; Wraith HD 2-16x28)	Sightmark does not publish the height of the unit’s optical axis above its mounting base
Sightmark Wraith HD 4-32x50Night vision scopes	"any optic from the Sightmark Wraith series of riflescopes" (series wording; Wraith HD 4-32x50)	Sightmark does not publish the height of the unit’s optical axis above its mounting base

Tube center above the rail is calculated only when the mount maker says where its height is measured from and the optic maker states a tube diameter; each blank says which figure is missing.

Specs

Type
Type QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. Read more →	Mount for one thermal or NV line
Mounts to
Clamps onto Picatinny and Weaver rails The slotted rails most mounts clamp onto. Picatinny (MIL-STD-1913) has evenly spaced slots of one width; Weaver slots are narrower and spaced irregularly. Weaver mounts fit Picatinny; the reverse not always. Read more →	PicatinnyRail type not printed in the spec table; the Wraiths it fits clamp Picatinny rails
Quick-detach QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. Read more →	Yes"Ultra-fast, easy locking quick-detach levers"; "operated with simply flip toggles"
Holds
Holds	Maker's own interfaceReplaces the Wraith's stock mount; also fits 2nd generation Wolfhound prismatic sights
Geometry
Height, as published Scope height over bore How far the scope's center sits above the barrel's center. It decides your cheek weld and the bullet's path at close range. We calculate only the part above the rail, where makers publish it. Read more →	Not published
Cantilever Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. Read more →	Not stated
Forward offset Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. Read more →	Not published
Length	3.4 in (87 mm)
Weight and build
Weight Weight How heavy the device is. Check whether the maker weighed it with or without the battery, because brands do it differently. Read more →	0.3 lb (0.13 kg)4.6 oz
Material	Hard-anodized 6061-T6 aluminum, matte black
Buying
Made in	Not published
Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. Read more →	Not published
Maker part number	SM13025.001
US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. Read more →	$60Sightmark store (sightmark.com)
Check eBaynew and used

Spec table: length 3.4 in / 87 mm, width 1.2 in / 30 mm, height .5 in / 12 mm. The 12 mm is the mount body's own height, not a centerline height, so height is null. The page copy calls it the "Wraith HD Locking Quick Detach Mount". Down.rail is set from the Wraith manuals (the units mount to Picatinny rails), not from this page.

Source: Sightmark store, Locking Quick Detach Mount (SM13025.001).

Added October 12, 2026 · Specs last checked October 12, 2026

More from Sightmark

Sightmark · Device mount

Wraith HD Replacement Mount

Picatinny · Maker's own interface$20

Sightmark · Device mount

Wraith Mini Long Mount

Weaver or Picatinny · Maker's own interface · 4.9 oz$50

Sightmark · Device mount

Wraith 4K Monocular Fixed Picatinny Mount

Weaver or Picatinny · Maker's own interface · 1.2 oz$60