Sightmark Wraith Mini Long Mount
Mount for one thermal or NV line · 4.9 oz · $50
QD mount
A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot.
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Optics it fits
Sightmark says: "specifically designed for the Wraith Mini digital day/night riflescope (compatible with all Wraith Riflescope models)"; Compatible with: Wraith HD, Wraith 4K Max, Wraith 4K Mini; "Not compatible with Wraith Monocular". Only the named lines are linked; the Wraith 4K 4-32x40 (SM18040, whose EU version ships with a bolt-action mount) and the Wraith Mini thermal are not.
Maker says it fits
| Optic | Who says so | Tube center above the rail (calculated) |
|---|---|---|
| Sightmark Wraith 4K Max 3-24x50Night vision scopes | "Compatible with: ... Wraith 4K Max" (mount page) | Sightmark does not publish the height of the unit’s optical axis above its mounting base |
| Sightmark Wraith 4K Mini 2-16x32Night vision scopes | "Compatible with: ... Wraith 4K Mini" (mount page) | Sightmark does not publish the height of the unit’s optical axis above its mounting base |
| Sightmark Wraith 4K Mini 4-32x32Night vision scopes | "Compatible with: ... Wraith 4K Mini" (mount page) | Sightmark does not publish the height of the unit’s optical axis above its mounting base |
| Sightmark Wraith HD 2-16x28Night vision scopes | "Compatible with: ... Wraith HD" (mount page) | Sightmark does not publish the height of the unit’s optical axis above its mounting base |
| Sightmark Wraith HD 4-32x50Night vision scopes | "Compatible with: ... Wraith HD" (mount page) | Sightmark does not publish the height of the unit’s optical axis above its mounting base |
Tube center above the rail is calculated only when the mount maker says where its height is measured from and the optic maker states a tube diameter; each blank says which figure is missing.
Specs
| Type | |
|---|---|
| Type QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Mount for one thermal or NV line |
| Mounts to | |
| Clamps onto Picatinny and Weaver rails The slotted rails most mounts clamp onto. Picatinny (MIL-STD-1913) has evenly spaced slots of one width; Weaver slots are narrower and spaced irregularly. Weaver mounts fit Picatinny; the reverse not always. | Weaver or PicatinnyMount type: "Weaver / Picatinny rail"; "multiple mounting positions" |
| Quick-detach QD mount A quick-detach mount: a lever or throw clamp takes the scope off the rail without tools. Worth it only if it goes back to the same zero, so mark the rail slot. | Not statedClamp type not described |
| Holds | |
| Holds | Maker's own interfaceBolts to the bottom of the Wraith with two included screws; "multiple holes to allow adjustments forward or back for comfortable eye relief" (manual) |
| Geometry | |
| Height, as published Scope height over bore How far the scope's center sits above the barrel's center. It decides your cheek weld and the bullet's path at close range. We calculate only the part above the rail, where makers publish it. | Not published |
| Cantilever Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Yes |
| Forward offset Cantilever mount A one-piece mount whose rings sit forward of the rail clamp, usually about 2 in. It moves the scope forward so a thermal's short eye relief works on an AR-15's flat-top rail. | Not published"positions your scope forward for proper eye relief"; no offset figure |
| Length | 8 in (203.2 mm) |
| Torque | Screws into the Wraith: "Tighten to 40-inch pounds" (manual) |
| Weight and build | |
| Weight Weight How heavy the device is. Check whether the maker weighed it with or without the battery, because brands do it differently. | 0.3 lb (0.14 kg)4.9 oz |
| Material | Aluminum, matte black (one-piece) |
| Buying | |
| Made in | Not published |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | SM18041.01 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $50Sightmark store (sightmark.com) |
Sightmark's bolt-action mount for the Wraith: "Ideal for use on most bolt action firearms"; "leaving plenty of rail space behind your scope". Dimensions 8 x 1.26 x .92 in / 203.2 x 32 x 23 mm (page copy: "measures 8” x 1.26” x 0.92”"; length is the first figure).
Source: Sightmark store, Wraith Mini Long Mount (SM18041.01), Sightmark Wraith 4K Mini Long Mount instructions (PDF).
Added October 12, 2026 · Specs last checked October 12, 2026
More from Sightmark
Sightmark · Device mount
Wraith HD Replacement Mount
Sightmark · Device mount
Wraith 4K Monocular Fixed Picatinny Mount
Sightmark · Device mount · QD
Wraith Locking Quick Detach Mount