BOG DeadShot Tripod
25 to 64 in · 2.3 lb · $65
Compare the DeadShot Tripod with other tripods →
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Heads and saddles for the DeadShot Tripod
Sold with its own yoke on top. All heads and saddles.
Specs
| Height | |
|---|---|
| Maximum height Tripod height The maker's maximum and minimum height. Check how it was measured: with or without the head, with or without a center column, and at which leg angle. Brands do it differently. | 64 in (1,626 mm)BOG gives a 25" to 64" height range ("sitting to short standing"). |
| Minimum height Tripod height The maker's maximum and minimum height. Check how it was measured: with or without the head, with or without a center column, and at which leg angle. Brands do it differently. | 25 in (635 mm) |
| Heights include a head | Not stated |
| Center column | Not stated |
| Folded length | Not published |
| Folded diameter | Not published |
| Legs | |
| Leg sections | Not published |
| Leg locks Leg locks How each leg section is held at length: twist collars, flip levers, or a trigger on stick-style tripods. Twist locks are quiet and snag-free; levers are quick to read and work with gloves. | Twist |
| Leg material | Aluminum |
| Leg tube diameter | Not published |
| Inverted legs Inverted legs Legs built with the thickest tube at the bottom and the locks up top. The locks stay out of mud and snow and sit within reach while standing. | No |
| Leg angle stops Leg angle positions Preset stops for how far a tripod's legs spread. A narrow angle (around 20 to 25 degrees) gives the full standing height; wider stops drop the tripod for kneeling, sitting or prone. | Not published |
| Top | |
| As sold | Shooting yoke |
| Mounting 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | BOG USR shooting yoke |
| Arca-Swiss Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | No, add an Arca head or clamp |
| Bowl Tripod bowl A cup-shaped top, usually 75 or 100 mm, that takes a leveling head. You level the rifle in the bowl without adjusting the legs. | — |
| Accessory threads 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | Not published |
| Weight and load | |
| Weight | 2.3 lb (1.05 kg)2 lb 5 oz |
| Load rating (maker’s claim) Load rating The weight a maker says the tripod (or head) will hold. A maker's claim, tested each brand's own way. Your rig is limited by the weaker of the tripod and the head. | Not published |
| Height per pound carried (calculated) | 27.7 in per lb |
| Load rating ÷ own weight (calculated) Load rating The weight a maker says the tripod (or head) will hold. A maker's claim, tested each brand's own way. Your rig is limited by the weaker of the tripod and the head. | — |
| Buying | |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Made in | Not published |
| Maker part number | 1216932 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $65BOG store |
Calculated rows use only the maker's own height, weight and load figures. Load ratings are the maker's claim; brands do not test them the same way.
Source: BOG product page.
Added October 12, 2026 · Specs last checked October 12, 2026