Heads and saddles / HOG Saddle
HOG Saddle MOD 7
Rifle saddle · 15.8 oz · $309
Rifle saddle
A clamp with padded jaws that closes on the rifle's forend or stock, so a rifle with no rail can sit on a tripod. The jaw opening, not always published, decides which stocks fit.
- A Knob clamp
- B 3/8-16 and 1/4-20 back-up threads
- C Anti-rotation slots for QD plates
NSN 1005-01-616-2719. HOG Saddle says it is standard issue in the Marine Corps and U.S. Army.
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Tripods it fits
"Maker says it fits" means the head maker or the tripod maker sells the two together or names the pairing on its own page. "Interfaces match" is our check that the tripod's published top (thread, bowl or Arca clamp) meets this saddle's published base; it says the parts connect, not that the maker has tested them. Rig figures are calculated from both makers' numbers.
| Tripod | Basis | Tripod max height | Rig weight (calculated) | Rig load rating (calculated) |
|---|---|---|---|---|
| HOG Saddle NCT-PIGlite-CF3 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 59.5 in (1,511 mm) | 3.9 lb (1.76 kg) | — |
| HOG Saddle NCT-PIGlite-CF4 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 59.5 in (1,511 mm) | 4 lb (1.81 kg) | — |
| KJI K500 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 53.9 in (1,368 mm) | 4.1 lb (1.85 kg) | — |
| KJI K700 V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 56.3 in (1,429 mm) | 5 lb (2.25 kg) | — |
| KJI K750 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 56.3 in (1,429 mm) | 4.1 lb (1.85 kg) | — |
| KJI K920 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 66.4 in (1,686 mm) | 6.9 lb (3.15 kg) | — |
Show all 22 that fit
| Tripod | Basis | Tripod max height | Rig weight (calculated) | Rig load rating (calculated) |
|---|---|---|---|---|
| KJI K950 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 71.5 in (1,816 mm) | 7.2 lb (3.25 kg) | — |
| KJI Kopfjäger K700 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 72 in (1,829 mm) | 6.5 lb (2.96 kg) | — |
| KJI Kopfjäger K800 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 64 in (1,626 mm) | 4.8 lb (2.19 kg) | — |
| Leofoto LM-364CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 55.3 in (1,405 mm) | 5.3 lb (2.42 kg) | — |
| Leofoto LM-403CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 61.3 in (1,557 mm) | 6.2 lb (2.8 kg) | — |
| Leofoto LS-364CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 58.1 in (1,477 mm) | 4.9 lb (2.23 kg) | — |
| Leofoto LS-365CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 60.1 in (1,526 mm) | 4.9 lb (2.24 kg) | — |
| Two Vets Kit V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 80 in (2,032 mm) | 4.7 lb (2.15 kg) | — |
| Two Vets No Name V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.7 lb (2.6 kg) | — |
| Two Vets No Name V2 Inverted | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.9 lb (2.69 kg) | — |
| Two Vets QDT V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.7 lb (2.6 kg) | — |
| Two Vets QDT V2 Inverted | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.7 lb (2.6 kg) | — |
| Two Vets Ranger | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.2 lb (2.35 kg) | — |
| Two Vets Recon V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.7 lb (2.6 kg) | — |
| Two Vets Recon V2 Inverted | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.7 lb (2.6 kg) | — |
| Warrior Tripods The General | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 64 in (1,626 mm) | 4 lb (1.81 kg) | — |
Rig weight is the tripod's published weight plus this saddle's; rig load is the lower of the two published ratings. Blank where a maker does not publish the number, or where the tripod is sold with its own head on top.
Specs
| Type | |
|---|---|
| Type Rifle saddle A clamp with padded jaws that closes on the rifle's forend or stock, so a rifle with no rail can sit on a tripod. The jaw opening, not always published, decides which stocks fit. | Rifle saddle |
| Mounts to | |
| Base 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | 1/4-20 and 3/8-16 stainless back-up threads, with anti-rotation slots for QD plates with video pins |
| Base thread 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | 3/8-16 or 1/4-20 |
| Base is an Arca dovetail Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | No |
| Holds | |
| Top | Saddle with 1/4 in recessed urethane pads; opens 1/4 in wider than the original model |
| Arca-Swiss clamp Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | No |
| Picatinny | No |
| Jaw opening Rifle saddle A clamp with padded jaws that closes on the rifle's forend or stock, so a rifle with no rail can sit on a tripod. The jaw opening, not always published, decides which stocks fit. | Not published |
| Clamp | Screw knob |
| Movement | |
| Base diameter | Not published |
| Panning | Not stated |
| Tension or drag control | Not stated |
| Tilt and leveling | Not stated |
| Size and weight | |
| Height Tripod height The maker's maximum and minimum height. Check how it was measured: with or without the head, with or without a center column, and at which leg angle. Brands do it differently. | Not published |
| Weight | 1 lb (0.45 kg)15.8 oz |
| Load rating (maker’s claim) Load rating The weight a maker says the tripod (or head) will hold. A maker's claim, tested each brand's own way. Your rig is limited by the weaker of the tripod and the head. | Not published |
| Buying | |
| Material | CNC-machined aluminum, hard anodized; black oxide stainless bolt and guide rods |
| Made in | USA (Kansas City) |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | MOD7 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $309HOG Saddle store (stores.hogsaddle.com) |
HOG Saddle publishes no jaw opening. The 2 11/16 in open and 1 1/2 in closed figures on dealer pages are not from the maker, so they are left out.
Source: HOG Saddle store, MOD 7 page.
Added October 12, 2026 · Specs last checked October 12, 2026