Leofoto LS-364CX
3.5 to 58.1 in · 3.9 lb · 55 lb load · $329
Compare the LS-364CX with other tripods →
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Heads and saddles for the LS-364CX
"Maker says it fits" means the head maker or Leofoto sells the two together or names the pairing on its own page. "Interfaces match" is our check that the published top (3/8-16 stud) meets the head's published base; the parts connect, but no maker has said so. Rig figures are calculated from both makers' numbers.
| Head or saddle | Basis | Its weight | Rig weight (calculated) | Rig load rating (calculated) | Top of head at max height (calculated) |
|---|---|---|---|---|---|
| Leofoto LH-40 | Maker says it fitsSold as the LS-364CX + LH-40 set | 1.1 lb (0.49 kg) | 5 lb (2.27 kg) | 44 lb (20 kg) | 61.6 in (1,564 mm) |
| Leofoto LB-75 Leveling Base | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 0.7 lb (0.32 kg) | 4.6 lb (2.1 kg) | 55 lb (25 kg) | 60.5 in (1,536 mm) |
| Leofoto LH-36 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 0.9 lb (0.41 kg) | 4.8 lb (2.19 kg) | 40 lb (18 kg) | 61.5 in (1,561 mm) |
| Leofoto LH-55LSC Camo | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.7 lb (0.79 kg) | 5.7 lb (2.57 kg) | 55 lb (25 kg) | 62.2 in (1,579 mm) |
| Leofoto MK-40X + GS-3 Rifle Combo | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.7 lb (0.76 kg) | 5.6 lb (2.54 kg) | 44 lb (20 kg) | 64.9 in (1,649 mm) |
| HOG Saddle MOD 7 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1 lb (0.45 kg) | 4.9 lb (2.23 kg) | — | Head height not published |
Show all 23 that fit
| Head or saddle | Basis | Its weight | Rig weight (calculated) | Rig load rating (calculated) | Top of head at max height (calculated) |
|---|---|---|---|---|---|
| HOG Saddle PIG Saddle Gen 2 Arca | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.3 lb (0.58 kg) | 5.2 lb (2.36 kg) | — | Head height not published |
| HOG Saddle TH-1.4 Turtle Head with K-Clamp | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 0.9 lb (0.41 kg) | 4.8 lb (2.19 kg) | 55 lb (25 kg) | 61.5 in (1,561 mm) |
| KJI Nomad Ball Head | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | Not published | — | 30 lb (13.6 kg) | 61.6 in (1,564 mm) |
| KJI Pathfinder Inverted Ball Head | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 0.5 lb (0.24 kg) | 4.5 lb (2.02 kg) | 25 lb (11.3 kg) | 60.9 in (1,548 mm) |
| KJI Reaper Grip System | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 2.5 lb (1.13 kg) | 6.4 lb (2.91 kg) | — | Head height not published |
| KJI Reaper Rail System, Arca-Swiss | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 2 lb (0.9 kg) | 5.9 lb (2.68 kg) | — | Head height not published |
| KJI Titan Inverted Ball Head | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | Not published | — | 55 lb (25 kg) | 62.1 in (1,577 mm) |
| NightSnipe Leveling Head | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.3 lb (0.57 kg) | 5.2 lb (2.35 kg) | 55 lb (24.9 kg) | Head height not published |
| NightSnipe NS67 V2 Low Profile Ball Head | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1 lb (0.45 kg) | 4.9 lb (2.23 kg) | 55 lb (24.9 kg) | Head height not published |
| NightSnipe Shooting Saddle with Direct Arca Mount | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.3 lb (0.6 kg) | 5.3 lb (2.38 kg) | — | Head height not published |
| Spartan Precision Davros Pro Head Gen 2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 0.5 lb (0.22 kg) | 4.4 lb (2 kg) | — | Head height not published |
| Sunwayfoto IB-60 Inverted Ball Head | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.1 lb (0.51 kg) | 5.1 lb (2.29 kg) | 55 lb (25 kg) | 61.9 in (1,573 mm) |
| Sunwayfoto XB-60 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.2 lb (0.56 kg) | 5.2 lb (2.34 kg) | 55 lb (25 kg) | 61.9 in (1,573 mm) |
| Tricer AK Ball Head | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 0.6 lb (0.27 kg) | 4.5 lb (2.05 kg) | 33 lb (15 kg) | 60.5 in (1,535.5 mm) |
| Tricer DH Ball Head | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.6 lb (0.74 kg) | 5.5 lb (2.52 kg) | 33 lb (15 kg) | 60.5 in (1,535.5 mm) |
| Two Vets 55mm Dual Tension Ball Head, ARCALOCK Dual Clamp | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.6 lb (0.74 kg) | 5.5 lb (2.52 kg) | — | Head height not published |
| Two Vets 65mm Dual Tension Ball Head, ARCALOCK Dual Clamp | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 1.9 lb (0.85 kg) | 5.8 lb (2.63 kg) | — | Head height not published |
Rig weight is this tripod's published weight plus the head's; rig load is the lower of the two published ratings. Top of head adds the head maker's published height to Leofoto's maximum, which Leofoto measures without a head. Blank where a maker does not publish the number. All heads and saddles.
Specs
| Height | |
|---|---|
| Maximum height Tripod height The maker's maximum and minimum height. Check how it was measured: with or without the head, with or without a center column, and at which leg angle. Brands do it differently. | 58.1 in (1,477 mm)Leofoto publishes one maximum and one minimum height for the bare tripod; it does not say at which leg angle. |
| Minimum height Tripod height The maker's maximum and minimum height. Check how it was measured: with or without the head, with or without a center column, and at which leg angle. Brands do it differently. | 3.5 in (90 mm) |
| Heights include a head | No, tripod only |
| Center column | No |
| Folded length | 21.3 in (540 mm) |
| Folded diameter | Not published |
| Legs | |
| Leg sections | 4 |
| Leg locks Leg locks How each leg section is held at length: twist collars, flip levers, or a trigger on stick-style tripods. Twist locks are quiet and snag-free; levers are quick to read and work with gloves. | Twist |
| Leg material | Carbon fiber |
| Leg tube diameter | 36 / 32 / 28 / 25 mm |
| Inverted legs Inverted legs Legs built with the thickest tube at the bottom and the locks up top. The locks stay out of mud and snow and sit within reach while standing. | No |
| Leg angle stops Leg angle positions Preset stops for how far a tripod's legs spread. A narrow angle (around 20 to 25 degrees) gives the full standing height; wider stops drop the tripod for kneeling, sitting or prone. | 23°, 55°, 85° |
| Top | |
| As sold | Bare top: add your own head |
| Mounting 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | 3/8" stud on a fixed apex about 60 mm across |
| Arca-Swiss Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | No, add an Arca head or clamp |
| Bowl Tripod bowl A cup-shaped top, usually 75 or 100 mm, that takes a leveling head. You level the rifle in the bowl without adjusting the legs. | — |
| Accessory threads 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | 1/4-20 |
| Weight and load | |
| Weight | 3.9 lb (1.78 kg)Tripod only, no head |
| Load rating (maker’s claim) Load rating The weight a maker says the tripod (or head) will hold. A maker's claim, tested each brand's own way. Your rig is limited by the weaker of the tripod and the head. | 55 lb (25 kg) |
| Height per pound carried (calculated) | 14.8 in per lb |
| Load rating ÷ own weight (calculated) Load rating The weight a maker says the tripod (or head) will hold. A maker's claim, tested each brand's own way. Your rig is limited by the weaker of the tripod and the head. | 14× |
| Buying | |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Made in | Not published |
| Maker part number | LS-364CX |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $329Leofoto USA store |
Calculated rows use only the maker's own height, weight and load figures. Load ratings are the maker's claim; brands do not test them the same way.
Source: Leofoto USA product page.
Added October 12, 2026 · Specs last checked October 12, 2026