KJI Titan Inverted Ball Head
Ball head · 3.9 in tall · 60 lb load · $350
Ball head
A tripod head built around a locking ball. Loosen it and the rifle moves in every direction at once; tighten it and everything stops. Most shooting heads add a tension knob so the rifle moves under a push but does not flop.
- A 60 mm ball
- B 72 mm base
- C Arca-Swiss clamp with a quarter-turn lever
KJI marks it controlled under the EAR for export.
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Tripods it fits
"Maker says it fits" means the head maker or the tripod maker sells the two together or names the pairing on its own page. "Interfaces match" is our check that the tripod's published top (thread, bowl or Arca clamp) meets this head's published base; it says the parts connect, not that the maker has tested them. Rig figures are calculated from both makers' numbers.
| Tripod | Basis | Tripod max height | Rig weight (calculated) | Rig load rating (calculated) | Top of head at max height (calculated) |
|---|---|---|---|---|---|
| KJI K500 | Maker says it fits"Compatible with KJI Reaper systems and ball heads" (K500 page) | 53.9 in (1,368 mm) | — | 60 lb (27.2 kg) | 57.8 in (1,468 mm) |
| KJI K700 V2 | Maker says it fits"Compatible with KJI’s full line of Reaper shooting systems and ball heads" (K700 V2 page) | 56.3 in (1,429 mm) | — | 60 lb (27.2 kg) | 60.2 in (1,529 mm) |
| KJI K750 | Maker says it fits"Integrates seamlessly with KJI Reaper systems and ball heads" (K750 page) | 56.3 in (1,429 mm) | — | 60 lb (27.2 kg) | 60.2 in (1,529 mm) |
| KJI K920 | Maker says it fits"Compatible with KJI Reaper heads and ball heads" (K920 page) | 66.4 in (1,686 mm) | — | 60 lb (27.2 kg) | 70.3 in (1,786 mm) |
| HOG Saddle NCT-PIGlite-CF3 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 59.5 in (1,511 mm) | — | 60 lb (27.2 kg) | Tripod maker does not say whether its height includes a head |
| HOG Saddle NCT-PIGlite-CF4 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 59.5 in (1,511 mm) | — | 60 lb (27.2 kg) | Tripod maker does not say whether its height includes a head |
Show all 22 that fit
| Tripod | Basis | Tripod max height | Rig weight (calculated) | Rig load rating (calculated) | Top of head at max height (calculated) |
|---|---|---|---|---|---|
| KJI K950 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 71.5 in (1,816 mm) | — | 60 lb (27.2 kg) | 75.4 in (1,916 mm) |
| KJI Kopfjäger K700 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 72 in (1,829 mm) | — | 25 lb (11.3 kg) | 75.9 in (1,929 mm) |
| KJI Kopfjäger K800 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 64 in (1,626 mm) | — | 20 lb (9.1 kg) | 68 in (1,726 mm) |
| Leofoto LM-364CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 55.3 in (1,405 mm) | — | 60 lb (27.2 kg) | 59.3 in (1,505 mm) |
| Leofoto LM-403CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 61.3 in (1,557 mm) | — | 60 lb (27.2 kg) | 65.2 in (1,657 mm) |
| Leofoto LS-364CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 58.1 in (1,477 mm) | — | 55 lb (25 kg) | 62.1 in (1,577 mm) |
| Leofoto LS-365CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 60.1 in (1,526 mm) | — | 44 lb (20 kg) | 64 in (1,626 mm) |
| Two Vets Kit V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 80 in (2,032 mm) | — | 44 lb (20 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets No Name V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | — | 60 lb (27.2 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets No Name V2 Inverted | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | — | 60 lb (27.2 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets QDT V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | — | 60 lb (27.2 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets QDT V2 Inverted | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | — | 60 lb (27.2 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets Ranger | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | — | 44 lb (20 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets Recon V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | — | 60 lb (27.2 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets Recon V2 Inverted | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | — | 60 lb (27.2 kg) | Tripod maker does not say whether its height includes a head |
| Warrior Tripods The General | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 64 in (1,626 mm) | — | — | Tripod maker does not say whether its height includes a head |
Rig weight is the tripod's published weight plus this head's; rig load is the lower of the two published ratings. Top of head adds this head's published height to the tripod's published maximum, only where the tripod maker measures without a head. Blank where a maker does not publish the number, or where the tripod is sold with its own head on top.
Specs
| Type | |
|---|---|
| Type Ball head A tripod head built around a locking ball. Loosen it and the rifle moves in every direction at once; tighten it and everything stops. Most shooting heads add a tension knob so the rifle moves under a push but does not flop. | Ball head, inverted |
| Mounts to | |
| Base 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | Standard 3/8-16 tripod base mount |
| Base thread 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | 3/8-16 |
| Base is an Arca dovetail Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | No |
| Holds | |
| Top | Arca-Swiss clamp with a quarter-turn locking lever |
| Arca-Swiss clamp Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | Yes |
| Picatinny | No |
| Clamp | Lever |
| Movement | |
| Ball diameter Ball head A tripod head built around a locking ball. Loosen it and the rifle moves in every direction at once; tighten it and everything stops. Most shooting heads add a tension knob so the rifle moves under a push but does not flop. | 60 mm |
| Base diameter | 72 mm |
| Panning | 360°The description says there is no separate pan knob; the spec table lists one. Left blank. |
| Tension or drag control | Yes |
| Tilt and leveling | 90° with a front drop notch |
| Size and weight | |
| Height Tripod height The maker's maximum and minimum height. Check how it was measured: with or without the head, with or without a center column, and at which leg angle. Brands do it differently. | 3.9 in (100 mm)KJI spec table: length 115 mm, width 113 mm, height 100 mm (3.93 in). |
| Weight | Not published |
| Load rating (maker’s claim) Load rating The weight a maker says the tripod (or head) will hold. A maker's claim, tested each brand's own way. Your rig is limited by the weaker of the tripod and the head. | 60 lb (27.2 kg)60 lb |
| Buying | |
| Material | Aluminum, hard anodized |
| Made in | Not published |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | KJ86025 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $350KJI store (out of stock when checked) |
Source: KJI product page (spec table).
Added October 12, 2026 · Specs last checked October 12, 2026