Two Vets 65mm Dual Tension Ball Head, ARCALOCK Dual Clamp
Ball head · 30 oz · $350
Ball head
A tripod head built around a locking ball. Loosen it and the rifle moves in every direction at once; tighten it and everything stops. Most shooting heads add a tension knob so the rifle moves under a push but does not flop.
- A 65 mm ball
- B Arca-Swiss and Picatinny clamp
- C 3/8-16 thread
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Tripods it fits
"Maker says it fits" means the head maker or the tripod maker sells the two together or names the pairing on its own page. "Interfaces match" is our check that the tripod's published top (thread, bowl or Arca clamp) meets this head's published base; it says the parts connect, not that the maker has tested them. Rig figures are calculated from both makers' numbers.
Show all 22 that fit
| Tripod | Basis | Tripod max height | Rig weight (calculated) | Rig load rating (calculated) |
|---|---|---|---|---|
| HOG Saddle NCT-PIGlite-CF3 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 59.5 in (1,511 mm) | 4.8 lb (2.17 kg) | — |
| HOG Saddle NCT-PIGlite-CF4 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 59.5 in (1,511 mm) | 4.9 lb (2.21 kg) | — |
| KJI K500 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 53.9 in (1,368 mm) | 5 lb (2.25 kg) | — |
| KJI K700 V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 56.3 in (1,429 mm) | 5.8 lb (2.65 kg) | — |
| KJI K750 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 56.3 in (1,429 mm) | 5 lb (2.25 kg) | — |
| KJI K920 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 66.4 in (1,686 mm) | 7.8 lb (3.55 kg) | — |
| KJI K950 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 71.5 in (1,816 mm) | 8 lb (3.65 kg) | — |
| KJI Kopfjäger K700 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 72 in (1,829 mm) | 7.4 lb (3.36 kg) | — |
| KJI Kopfjäger K800 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 64 in (1,626 mm) | 5.7 lb (2.6 kg) | — |
| Leofoto LM-364CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 55.3 in (1,405 mm) | 6.2 lb (2.82 kg) | — |
| Leofoto LM-403CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 61.3 in (1,557 mm) | 7.1 lb (3.2 kg) | — |
| Leofoto LS-364CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 58.1 in (1,477 mm) | 5.8 lb (2.63 kg) | — |
| Leofoto LS-365CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 60.1 in (1,526 mm) | 5.8 lb (2.64 kg) | — |
| Warrior Tripods The General | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 64 in (1,626 mm) | 4.9 lb (2.21 kg) | — |
Rig weight is the tripod's published weight plus this head's; rig load is the lower of the two published ratings. Blank where a maker does not publish the number, or where the tripod is sold with its own head on top.
Specs
| Type | |
|---|---|
| Type Ball head A tripod head built around a locking ball. Loosen it and the rifle moves in every direction at once; tighten it and everything stops. Most shooting heads add a tension knob so the rifle moves under a push but does not flop. | Ball head |
| Mounts to | |
| Base 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | Attaches to tripods with a 3/8" male stud |
| Base thread 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | 3/8-16 |
| Base is an Arca dovetail Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | No |
| Holds | |
| Top | Area 419 dual Picatinny/Arca clamp; with an Area 419 ARCALOCK rail it stops the rifle sliding forward |
| Arca-Swiss clamp Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | Yes |
| Picatinny | Yes |
| Clamp | Not stated |
| Movement | |
| Ball diameter Ball head A tripod head built around a locking ball. Loosen it and the rifle moves in every direction at once; tighten it and everything stops. Most shooting heads add a tension knob so the rifle moves under a push but does not flop. | 65 mm |
| Base diameter | Not published |
| Panning | Not stated |
| Tension or drag control | Yes |
| Tilt and leveling | Dual tension: a large knob for coarse and a small knob for fine drag |
| Size and weight | |
| Height Tripod height The maker's maximum and minimum height. Check how it was measured: with or without the head, with or without a center column, and at which leg angle. Brands do it differently. | Not published |
| Weight | 1.9 lb (0.85 kg)1 lb 14 oz |
| Load rating (maker’s claim) Load rating The weight a maker says the tripod (or head) will hold. A maker's claim, tested each brand's own way. Your rig is limited by the weaker of the tripod and the head. | Not publishedNo load rating; Two Vets suggests it for rifles of 20 lb and up |
| Buying | |
| Material | Not published |
| Made in | Not published |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | 65MMDUAL419 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $350Two Vets store |
Source: Two Vets product page.
Added October 12, 2026 · Specs last checked October 12, 2026