Leofoto LB-75 Leveling Base
Leveling base or head · 2.3 in tall · 11.4 oz · 55 lb load · $109
Leveling base
A half ball between tripod and head that tilts about 15 degrees each way and locks, so the head sits level without moving the legs. It sits on a 3/8-16 stud or in a tripod bowl; a leveling head adds a rifle clamp on top.
- A 75 mm base
- B Half-ball leveling, ±15°, locked by a butterfly handle
- C 3/8-16 threaded socket underneath
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Tripods it fits
"Maker says it fits" means the head maker or the tripod maker sells the two together or names the pairing on its own page. "Interfaces match" is our check that the tripod's published top (thread, bowl or Arca clamp) meets this head's published base; it says the parts connect, not that the maker has tested them. Rig figures are calculated from both makers' numbers.
| Tripod | Basis | Tripod max height | Rig weight (calculated) | Rig load rating (calculated) | Top of head at max height (calculated) |
|---|---|---|---|---|---|
| HOG Saddle NCT-PIGlite-CF3 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 59.5 in (1,511 mm) | 3.6 lb (1.64 kg) | 55 lb (25 kg) | Tripod maker does not say whether its height includes a head |
| HOG Saddle NCT-PIGlite-CF4 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 59.5 in (1,511 mm) | 3.7 lb (1.68 kg) | 55 lb (25 kg) | Tripod maker does not say whether its height includes a head |
| KJI K500 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 53.9 in (1,368 mm) | 3.8 lb (1.72 kg) | 55 lb (25 kg) | 56.2 in (1,427 mm) |
| KJI K700 V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 56.3 in (1,429 mm) | 4.7 lb (2.12 kg) | 55 lb (25 kg) | 58.6 in (1,488 mm) |
| KJI K750 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 56.3 in (1,429 mm) | 3.8 lb (1.72 kg) | 55 lb (25 kg) | 58.6 in (1,488 mm) |
| KJI K920 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 66.4 in (1,686 mm) | 6.7 lb (3.02 kg) | 55 lb (25 kg) | 68.7 in (1,745 mm) |
Show all 22 that fit
| Tripod | Basis | Tripod max height | Rig weight (calculated) | Rig load rating (calculated) | Top of head at max height (calculated) |
|---|---|---|---|---|---|
| KJI K950 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 71.5 in (1,816 mm) | 6.9 lb (3.12 kg) | 55 lb (25 kg) | 73.8 in (1,875 mm) |
| KJI Kopfjäger K700 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 72 in (1,829 mm) | 6.2 lb (2.83 kg) | 25 lb (11.3 kg) | 74.3 in (1,888 mm) |
| KJI Kopfjäger K800 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 64 in (1,626 mm) | 4.6 lb (2.07 kg) | 20 lb (9.1 kg) | 66.3 in (1,685 mm) |
| Leofoto LM-364CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 55.3 in (1,405 mm) | 5.1 lb (2.29 kg) | 55 lb (25 kg) | 57.6 in (1,464 mm) |
| Leofoto LM-403CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 61.3 in (1,557 mm) | 5.9 lb (2.67 kg) | 55 lb (25 kg) | 63.6 in (1,616 mm) |
| Leofoto LS-364CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 58.1 in (1,477 mm) | 4.6 lb (2.1 kg) | 55 lb (25 kg) | 60.5 in (1,536 mm) |
| Leofoto LS-365CX | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 60.1 in (1,526 mm) | 4.7 lb (2.11 kg) | 44 lb (20 kg) | 62.4 in (1,585 mm) |
| Two Vets Kit V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 80 in (2,032 mm) | 4.5 lb (2.02 kg) | 44 lb (20 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets No Name V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.5 lb (2.48 kg) | 55 lb (25 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets No Name V2 Inverted | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.6 lb (2.56 kg) | 55 lb (25 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets QDT V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.5 lb (2.48 kg) | 55 lb (25 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets QDT V2 Inverted | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.5 lb (2.48 kg) | 55 lb (25 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets Ranger | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 4.9 lb (2.22 kg) | 44 lb (20 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets Recon V2 | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.5 lb (2.48 kg) | 55 lb (25 kg) | Tripod maker does not say whether its height includes a head |
| Two Vets Recon V2 Inverted | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 65.5 in (1,664 mm) | 5.5 lb (2.48 kg) | 55 lb (25 kg) | Tripod maker does not say whether its height includes a head |
| Warrior Tripods The General | Interfaces match (calculated)Tripod’s 3/8-16 stud, head’s 3/8-16 base | 64 in (1,626 mm) | 3.7 lb (1.68 kg) | — | Tripod maker does not say whether its height includes a head |
Rig weight is the tripod's published weight plus this head's; rig load is the lower of the two published ratings. Top of head adds this head's published height to the tripod's published maximum, only where the tripod maker measures without a head. Blank where a maker does not publish the number, or where the tripod is sold with its own head on top.
Specs
| Type | |
|---|---|
| Type Leveling base A half ball between tripod and head that tilts about 15 degrees each way and locks, so the head sits level without moving the legs. It sits on a 3/8-16 stud or in a tripod bowl; a leveling head adds a rifle clamp on top. | Leveling base or head |
| Mounts to | |
| Base 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | 3/8"-16 threaded socket; installs on any tripod with a 3/8" stud |
| Base thread 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | 3/8-16 |
| Bowl Tripod bowl A cup-shaped top, usually 75 or 100 mm, that takes a leveling head. You level the rifle in the bowl without adjusting the legs. | — |
| Base is an Arca dovetail Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | No |
| Holds | |
| Top | 3/8"-16 stud for a ball head; three set screws stop the head turning |
| Arca-Swiss clamp Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | No |
| Picatinny | No |
| Clamp | Not stated |
| Movement | |
| Base diameter | 75 mm |
| Panning | Not stated |
| Tension or drag control | Not stated |
| Tilt and leveling | Half-ball leveling, ±15°, locked by a butterfly handle |
| Size and weight | |
| Height Tripod height The maker's maximum and minimum height. Check how it was measured: with or without the head, with or without a center column, and at which leg angle. Brands do it differently. | 2.3 in (59 mm)Leofoto: height 59 mm (2.32 in), top and base 75 mm across. |
| Weight | 0.7 lb (0.32 kg) |
| Load rating (maker’s claim) Load rating The weight a maker says the tripod (or head) will hold. A maker's claim, tested each brand's own way. Your rig is limited by the weaker of the tripod and the head. | 55 lb (25 kg) |
| Buying | |
| Material | CNC-machined aircraft-grade aluminum |
| Made in | Not published |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | LB-75 |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $109Leofoto USA (out of stock when checked) |
Goes under a ball head, not under the rifle. Leofoto sells the LB-75S with a 75 mm bowl adapter as a separate variant.
Source: Leofoto USA product page (LB series).
Added October 12, 2026 · Specs last checked October 12, 2026