Heads and saddles / NightSnipe
NightSnipe Picatinny Rail to Arca-Swiss Mount
Arca rail or adapter · $40
Arca-Swiss
A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds.
- A Clamps to the Picatinny rail with three screws
- B 80 mm (3-1/8 in) length
- C Arca-Swiss dovetail base
Check price
Affiliate links (Amazon, eBay): we may earn a commission. Prices change; the retailer's page is the current one.
Heads whose clamp takes it (calculated)
This is an Arca dovetail, so it fits any head with an Arca clamp. The heads on this site that have one:
HOG Saddle TH-1.4 Turtle Head with K-Clamp · KJI Nomad Ball Head · KJI Pathfinder Inverted Ball Head · KJI Reaper Rail System, Arca-Swiss · KJI Titan Inverted Ball Head · Leofoto LH-36 · Leofoto LH-40 · Leofoto LH-55LSC Camo · Leofoto YB-75LRC Leveling Head · NightSnipe Leveling Head · NightSnipe NS67 V2 Low Profile Ball Head · Sunwayfoto XB-60 · Tricer AK Ball Head · Tricer DH Ball Head · Two Vets 55mm Dual Tension Ball Head, ARCALOCK Dual Clamp · Two Vets 65mm Dual Tension Ball Head, ARCALOCK Dual Clamp
Tripods NightSnipe names
Specs
| Type | |
|---|---|
| Type Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | Arca rail or adapter |
| Mounts to | |
| Base 3/8-16 and 1/4-20 threads The two screw sizes tripods use. 3/8-16 (3/8 inch, 16 threads per inch) holds heads on shooting tripods; 1/4-20 is the smaller camera thread, used for accessories and light gear. | Arca-Swiss dovetail with safety screws at both ends |
| Base is an Arca dovetail Arca-Swiss A dovetail rail and clamp standard for tripod heads. A rail or plate on the rifle slides into an Arca clamp on the head and locks with a knob or lever, so the rifle goes on and off the tripod in seconds. | Yes |
| Holds | |
| Top | Clamps to the Picatinny rail under the rifle with three screws |
| Fits on the rifle | Picatinny |
| Size and weight | |
| Length | 3.1 in (80 mm) |
| Weight | Not published |
| Buying | |
| Material | Aircraft-grade aluminum |
| Made in | USA (Michigan) |
| Warranty Warranty How long the maker promises to repair or replace a faulty unit. Check whether it needs registration and whether it passes to a second owner. | Not published |
| Maker part number | Not published |
| US price US price The price we found for the unit in the US, with where it came from and when. Prices change often, so treat it as a snapshot. | $40Predator Hunter Outdoors (NightSnipe’s own store) |
Length published as "3-1/8 – 80mm". An M-LOK version (NSBH-MLM-5802) sells at the same price.
Source: Predator Hunter Outdoors product page (NightSnipe maker).
Added October 12, 2026 · Specs last checked October 12, 2026